IoT y embebidosPublicado 7 min de lectura
Del prototipo a la producción: las cinco etapas de un producto IoT
Plan, prototipo, piloto, certificación y producción — qué ocurre en cada etapa, cómo elegir la conectividad y las reglas de seguridad ineludibles.
Por ahora esta guía está publicada en inglés.
The short answer
Connected products go through five stages: blueprint, prototype, pilot, certification and production. Skipping the blueprint is the most expensive mistake — it is where you choose the radio, the power budget and the cloud, and those choices are hard to change once boards are made.
The five stages
- 1Blueprint (199 US$–499 US$): requirements, component and radio choice, power budget, bill of materials estimate and a risk list.
- 2Prototype (889 US$–1989 US$): working hardware on development boards, firmware and a simple dashboard.
- 3Pilot: a small batch in real conditions — battery life, range, enclosure and installation all get tested.
- 4Certification: radio and safety approvals such as FCC (US) and CE (EU), done by accredited labs.
- 5Production and fleet (2490 US$+): manufacturing files, provisioning, over-the-air updates and fleet monitoring.
Picking connectivity
| Radio | Range | Power | Best for |
|---|---|---|---|
| Wi-Fi | Building | High | Mains-powered devices with good coverage |
| Bluetooth LE | ~10–50 m | Very low | Wearables and phone-paired devices |
| LoRaWAN | Several km | Very low | Sensors sending small data rarely |
| LTE-M / NB-IoT | Cellular network | Low–medium | Mobile assets and remote sites |
Consejo: Measure the power budget early. A sensor that wakes every 10 minutes and one that wakes every 10 seconds can differ by years of battery life.
Security is not optional
- Unique credentials per device — never one shared password.
- Encrypted connections (TLS) and signed firmware updates.
- A plan to patch devices in the field for their whole life.
- Regulations such as the UK PSTI Act and the EU Cyber Resilience Act now set minimum rules for connected products.
Preguntas frecuentes
Do you design custom circuit boards?
Yes — custom PCB, enclosure and bill of materials are options in the IoT estimator. Manufacturing itself is done by partner factories.
Can we start with off-the-shelf hardware?
Often, yes. Many pilots run on development boards or ready-made gateways before a custom board is justified.
Globizzen nunca promete aprobaciones, posicionamientos, ingresos ni resultados de terceros. Prometemos un alcance claro, una preparación cuidadosa y actualizaciones honestas.