Skip to main content
Globizzen

Popular searches

IoT & EmbeddedPublished 7 min read

From prototype to production: the five stages of an IoT product

Blueprint, prototype, pilot, certification and production — what happens at each stage, how to pick connectivity and the security rules you can't skip.

The short answer

Connected products go through five stages: blueprint, prototype, pilot, certification and production. Skipping the blueprint is the most expensive mistake — it is where you choose the radio, the power budget and the cloud, and those choices are hard to change once boards are made.

The five stages

  1. 1Blueprint ($199–$499): requirements, component and radio choice, power budget, bill of materials estimate and a risk list.
  2. 2Prototype ($889–$1,989): working hardware on development boards, firmware and a simple dashboard.
  3. 3Pilot: a small batch in real conditions — battery life, range, enclosure and installation all get tested.
  4. 4Certification: radio and safety approvals such as FCC (US) and CE (EU), done by accredited labs.
  5. 5Production and fleet ($2,490+): manufacturing files, provisioning, over-the-air updates and fleet monitoring.

Picking connectivity

RadioRangePowerBest for
Wi-FiBuildingHighMains-powered devices with good coverage
Bluetooth LE~10–50 mVery lowWearables and phone-paired devices
LoRaWANSeveral kmVery lowSensors sending small data rarely
LTE-M / NB-IoTCellular networkLow–mediumMobile assets and remote sites

Tip: Measure the power budget early. A sensor that wakes every 10 minutes and one that wakes every 10 seconds can differ by years of battery life.

Security is not optional

  • Unique credentials per device — never one shared password.
  • Encrypted connections (TLS) and signed firmware updates.
  • A plan to patch devices in the field for their whole life.
  • Regulations such as the UK PSTI Act and the EU Cyber Resilience Act now set minimum rules for connected products.

Questions people ask

Do you design custom circuit boards?

Yes — custom PCB, enclosure and bill of materials are options in the IoT estimator. Manufacturing itself is done by partner factories.

Can we start with off-the-shelf hardware?

Often, yes. Many pilots run on development boards or ready-made gateways before a custom board is justified.

Globizzen never promises approvals, rankings, earnings or third-party outcomes. We promise clear scope, careful preparation and honest status updates.