Перейти к основному содержимому
Globizzen

Популярные запросы

IoT и встраиваемые системыОпубликовано 7 мин чтения

От прототипа к серии: пять этапов IoT-продукта

Концепция, прототип, пилот, сертификация и производство — что происходит на каждом этапе, как выбрать связь и какие правила безопасности обязательны.

Сейчас это руководство опубликовано на английском языке.

The short answer

Connected products go through five stages: blueprint, prototype, pilot, certification and production. Skipping the blueprint is the most expensive mistake — it is where you choose the radio, the power budget and the cloud, and those choices are hard to change once boards are made.

The five stages

  1. 1Blueprint (199 $–499 $): requirements, component and radio choice, power budget, bill of materials estimate and a risk list.
  2. 2Prototype (889 $–1 989 $): working hardware on development boards, firmware and a simple dashboard.
  3. 3Pilot: a small batch in real conditions — battery life, range, enclosure and installation all get tested.
  4. 4Certification: radio and safety approvals such as FCC (US) and CE (EU), done by accredited labs.
  5. 5Production and fleet (2 490 $+): manufacturing files, provisioning, over-the-air updates and fleet monitoring.

Picking connectivity

RadioRangePowerBest for
Wi-FiBuildingHighMains-powered devices with good coverage
Bluetooth LE~10–50 mVery lowWearables and phone-paired devices
LoRaWANSeveral kmVery lowSensors sending small data rarely
LTE-M / NB-IoTCellular networkLow–mediumMobile assets and remote sites

Совет: Measure the power budget early. A sensor that wakes every 10 minutes and one that wakes every 10 seconds can differ by years of battery life.

Security is not optional

  • Unique credentials per device — never one shared password.
  • Encrypted connections (TLS) and signed firmware updates.
  • A plan to patch devices in the field for their whole life.
  • Regulations such as the UK PSTI Act and the EU Cyber Resilience Act now set minimum rules for connected products.

Частые вопросы

Do you design custom circuit boards?

Yes — custom PCB, enclosure and bill of materials are options in the IoT estimator. Manufacturing itself is done by partner factories.

Can we start with off-the-shelf hardware?

Often, yes. Many pilots run on development boards or ready-made gateways before a custom board is justified.

Globizzen никогда не обещает одобрений, позиций в рейтингах, доходов или решений третьих сторон. Мы обещаем чёткий объём работ, тщательную подготовку и честные отчёты о статусе.